16
English
Playing Back Tapes
You can play back type I tapes.
Playing Back a Tape
1
Press
)
on the unit.
2
Put a cassette in with the exposed part of the
tape down.
3
Close the cassette holder gently.
4
Press TAPE
2
3
.
The unit automatically turns on and the tape
play starts. The tape direction indicator
(
3
or
2
) flashes slowly on the display.
• Each time you press the button, the tape direction
changes.
3
: plays the front side.
2
: plays the reverse side.
When the tape plays to the end, the deck automatically
stops if the reverse mode is set to
or
. (See “To
play both sides—Reverse Mode.”)
To stop playing,
press
7
.
To fast-wind to the left or to the right,
press
¢
or
4
while the tape is not
running.
The tape direction indicator (
3
or
2
) starts
flashing quickly on the display.
To remove the cassette,
press
)
on the unit.
To play both sides—Reverse Mode
You can set the deck to play just one side of a tape, both sides
once, or both sides continuously.
On the unit ONLY:
Press REV.MODE.
• Each time you press the button, reverse mode
changes as follows:
:
The deck automatically stops after playing both
sides of the tape. (Stops when playback in the
2
direction is finished.)
:
The deck continues to play both sides of the tape
until
7
is pressed.
:
The deck automatically stops after playing one
side of the tape.
The use of the C-120 or longer tape is not
recommended, since characteristic deterioration
may occur and this tape easily jams in the pinch
rollers and the capstans.
REV.MODE
TAPE
A U T
O R
E V E
R S E
PHON
ES
PHON
ES
A U
T O
R
E V
E R
S E
PHON
ES
A U
T O
R
E V
E R
S E
EN13-16_UX-P30[UW]f.pm6
03.6.4, 6:54 PM
16
