8
Playing Repeatedly—Repeat Play
1
Press repeatedly to specify the repeat
mode as follows:
REP TRK:
Repeats the current (or
specified) track. [
]
REP GRP:
Repeats all tracks in the
current group (MP3/WMA
only). [ ]
REP ALL:
Repeats all tracks.
[
ALL
]
REP OFF:
Normal playback
2
Programming the Playing Order
—Program Play
1
During stops, press until the PRGM
(program) indicator lights up before
playing.
2
or
• For MP3/WMA files: Select a group
number, then a track number.
• For CD: Select a track number.
3
Press to program the selected group/
track.
4
Repeat steps
2
and
3
to program other tracks
you want.
• If you try to program a 51st track, “FULL” will
appear.
5
The tracks are played back in the
programmed order.
Operations for Program Play (while not playing)
•
To check the programmed contents,
press
4
or
¢
.
•
To add tracks,
repeat steps
2
and
3
above.
•
To erase the last programmed track,
press CANCEL.
•
To erase the entire program,
press and hold CANCEL
for about 2 seconds.
•
To exit from program play,
press MODE.
– The stored program is kept.
Playing at Random—Random Play
1
Press until the RND (random) indicator
lights up before you start playback.
2
Playback starts in random order.
Random Play ends when all tracks are
played back.
Operations for Random Play
•
To skip a track,
press
¢
.
•
To go back to the beginning of the current track,
press
4
.
•
To exit from random play,
press MODE while
playback is stopped.
RESUME Play (For MP3/WMA only)
When you stop the playback by one of the following
operations, this System stores the beginning of the
stopped track on the disc.
– Pressing
7
once
– Changing the source
When you start playback again, playback starts from
the stored position.
To clear the stored position,
open the disc tray.
• When you clear the stored position and start
playback, playback starts from the beginning of the
first track.
NOTE:
This function does not work in Program Play and
Random Play.
EN01-12_UX-GP9D[B]3.indd 8
EN01-12_UX-GP9D[B]3.indd 8
2/22/08 9:56:06 AM
2/22/08 9:56:06 AM