40
Recording and Editing Operations (see pages 25
to 28)
• Do not vibrate the System while recording/editing tracks.
Take care especially while “WAIT” is shown on the
display. It may damage the recorded tracks in the System.
Giving (Editing) Titles to Tracks or Groups:
• When a track is recorded, the track title is given to the
track automatically. When you give a title to the track,
delete that title first, then enter your desired title.
On-Screen Operations (see pages 29 to 33)
On-screen Bar Operations:
• For DVD-VR, “PG” or “PL” appears instead of “TITLE”
on the on-screen bar.
Daily Timer Operations (see pages 34 and 35)
Setting the Daily Timer:
• If you do not specify the preset station or track number
correctly while setting a timer, the currently selected
station or the first track will be played when the timer is
activated.
• When you unplug the power cord or if a power failure
occurs, the timer will be canceled. You need to set the
clock first, then the timer again.
• If you set DVD Video as the source, Daily Timer will not
work correctly.
• If you set the Sleep Timer after Daily Timer starts playing
the selected source, Daily Timer is canceled.
Setup Menu Operations (see pages 36 and 37)
General:
• If the upper and lower parts of the menu are cut off,
adjust the picture size control of the TV.
LANGUAGE menu:
• When the language you have selected for “MENU
LANGUAGE,” “AUDIO LANGUAGE,” or “SUBTITLE”
is not recorded, the original language is used as the initial
language.
PICTURE menu—MONITOR TYPE:
• Even if “4:3 PS/4:3 MULTI PS” is selected, the screen size
may become 4:3 letter box while playing a disc/file. This
depends on how the discs are recorded.
• When you select “16:9 NORMAL/16:9 MULTI
NORMAL” or “16:9 AUTO/16:9 MULTI AUTO” for
a picture whose aspect ratio is 4:3, the picture changes
slightly due to the process of converting the picture
width.
OTHERS menu—ON SCREEN GUIDE:
• The setup menu and on-screen bar will be displayed (and
recorded) even if this function is set to “OFF.”
Subtitles and the information for zoom-in always appear
on the display regardless of this setting.
Maintenance
To get the best performance of the System, keep your discs
and mechanism clean.
Handling Discs
• Remove the disc from its case by holding it at the edge
while pressing the center hole lightly.
• Do not touch the shiny surface of the disc, or bend the
disc.
• Put the disc back in its case after use to prevent warping.
• Be careful not to scratch the surface of the disc when
placing it back in its case.
• Avoid exposure to direct sunlight, extreme temperature,
and moisture.
To clean the disc:
Wipe the disc with a soft cloth in a straight line from center
to edge.
Cleaning the System
• Stains should be wiped off with a soft cloth. If the System
is heavily stained, wipe it with a cloth soaked in water-
diluted neutral detergent and wrung well, then wipe clean
with a dry cloth.
• Since the System may deteriorate in quality, become
damaged or get its paint peeled off, be careful about the
following:
– DO NOT wipe it with a hard cloth.
– DO NOT wipe it forcefully.
– DO NOT wipe it with thinner or benzine.
– DO NOT apply any volatile substance such as
insecticides to it.
– DO NOT allow any rubber or plastic to remain in
contact for a long time.
To remove the speaker grilles
Holes
Projection
Speaker grille
EN37-46_UX-G500V[U]1.indd 40
EN37-46_UX-G500V[U]1.indd 40
3/11/08 12:58:40 PM
3/11/08 12:58:40 PM