(No.MB013)1-11
3.1.5 Removing the tuner assembly
(See Fig.12)
• Prior to performing the following procedure, remove the metal
cover.
(1) Disconnect the card wire from the tuner assembly.
(2) Remove the two screws
G
from the rear panel on the back
of the body.
Fig.12
3.1.6 Removing the rear cover/ rear panel
(See Fig.13 ~ 15)
• Prior to performing the following procedure, remove the metal
cover.
Reference:
The rear panel comes off with the tuner assembly. Remove the
tuner assembly if necessary.
(1) Remove the three screws
H
attaching the rear cover on the
back of the body.
(2) Remove the three screws
I
attaching the rear panel on the
back of the body.
(3) Release the two joints
d
on the right and left bottom of the
rear panel.
Fig.13
Fig.14
Fig.15
G
Card wire
Tuner assembly
Rear panel
Rear panel
Rear cover
I
I
H
H
H
Rear panel
d
Rear panel
d
