JVC TV-13143 User Manual Download Page 39

Page: 39 / 54

ENTER

SET

–

SET

ZER

O RETURN

RESET

SP/

TIMER

COUNTER

CANCEL

TV/CAP/TEXT

RETURN

PLA

REC

USE

REW

TRA

CKING

INPUT

TIN

RECORDING AND VIEWING THE SAME TV PROGRAM

NOTE:

•

If po wer is s witc hed off during recor ding, the TV set goes off and the VCR contin ues to recor d. Press the
STOP button to halt the recor ding and turn off the VCR.

•

The TV/VCR Channel cannot be c hang ed during recor ding.

Set the TV/CATV option to the appropriate
position. (See page 21.)

RECORDING A TV PROGRAM

Press the SP/EP button to select the desired
tape speed (SP or EP). “SP” or “EP” will
appear on the screen for 4 seconds.

- VHF/UHF channels

CATV - CABLE TV channels

To turn on the TV/VCR, press the PO WER
button.

Load a cassette tape with the erase pre

vention

tab intact.

00:00:00 SP

CONTINUE NEXT PAGE

POWER

SP/EP

5B20401A-E/P34-43

1/10/02, 4:55 PM

Summary of Contents for TV-13143























































Search results

Summary of Contents for TV-13143

Reviews:

Brands by name

Popular brands

JVC TV-13143, User Manual

Search results

Summary of Contents for TV-13143

Reviews:

Brands by name

Popular brands