(No.MY008)1-15
3.1.13 Removing the loading roller assembly
(See Figs.19 to 21)
• Remove the top cover, base board, chassis unit, clamper as-
sembly and top plate assembly.
(1) From the left side of the chassis unit, remove the screw
J
attaching the lock arm assembly. (See Fig.19.)
(2) Remove the projection
ap
of the lock arm assembly from
the joint
aq
while opening the cam plate R in the direction
of the arrow. (See Fig.19.)
(3) Remove the lock arm assembly from the projection
ar
of
the chassis unit. (See Fig.19.)
(4) Remove the projection
as
of the lock arm assembly from
the joint
at
of the cam plate L assembly. (See Fig.19.)
(5) From the right side of the lock arm assembly, remove the
loading roller spring L from the section
au
. (See Fig.20.)
(6) From the top side of the lock arm assembly, remove the
loading roller spring R in the direction of the arrow and re-
move the loading roller assembly. (See Fig.20.)
(7) Remove the roller guide R, HL washer and roller guide L
from the both ends of the loading roller assembly. (See
Fig.21.)
Fig.19
Fig.20
Fig.21
aq
ap
at
as
ar
Cam plate L assembly
Cam plate R
Chassis unit
Lock arm assembly
J
au
Loading roller
spring L
Loading roller assembly
Loading roller spring R
Lock arm assembly
Roller guide L
Roller guide R
HL washer
Loading roller assembly
Summary of Contents for TN2007-1026
Page 27: ...3 7 MEMO ...
