TM-2001U
TM-2701SU
15
29
V-Chip
Set Lock Code
Channel Guard and V-Chip settings are protected by a four-digit Lock Code. Your TV comes pre-set
with a Lock Code of "0000". You may change the code to any four-digit number you wish. To
change the Lock Code, follow the steps below.
Press the M
ENU
button
❷
To SET LOCK CODE
➛❿
To operate
The padlock icon appears
Press Z
ERO
to access the Lock Code
The first digit will be highlighted
➛❿
To select the number
❷
To move to the next digit
Continue to follow these directions for all four numbers
❷
To FINISH
➛❿
To save settings and exit
Your Lock Code is now set.
LOCK CODE
0 0 0 0
FINISH
0
• After a power interruption you must reset the Lock Code.
• Write your Lock Code number down and keep it hidden from potential viewers.
• If you forget the Lock Code, a new code may be set using the steps listed above.
NOTES:
28
V-Chip
Unrated Programs
Notes About Unrated Programs:
Unrated programming refers to any programming which does not contain a rating signal.
Programming on television stations which do not broadcast rating signals will be placed in the
“Unrated Programming" category.
Examples of Unrated programs:
Emergency Bulletins
Locally Originated Programming
News
Political Programs
Public Service Announcements
Religious Programs
Sports
Weather
Some Commercials
• TV programs or movies that do not have rating signals will be blocked if the Unrated Category is
set to BLOCK.
Directions to Block Unrated Programs:
You can block programs that are not rated.
Press the M
ENU
button
❷
To V-CHIP
➛❿
To operate (The lock icon appears)
Press Z
ERO
to access V-Chip setup options
❷
To UNRATED
➛❿
To VIEW or BLOCK
Press E
XIT
when done
UNRATED VIEW BLOCK
