E-12
Installation and connection
Safety
cable
Video signal
cable
Attach to ceiling slab
Insulation
tape
Power supply cable
Solder or
crimp
1.
2.
3.
Power
supply
cable
connection
BNC
connector
Wrap with
tape
Wrap with
tape
4.
Mounting the Camera to the Ceiling (continued)
Installation
1.
Connect the power supply cable.
Connect the cable protruding from the
ceiling to the power supply cable.
MEMO
The power supply cable uses materials
similar to those of machinery wiring, so
wrap the cable with insulation tape to
prevent it from becoming damaged when
mounting the camera.
Use durable wiring for the power supply
cable.
2.
Attach the safety cable to the ceiling
slab. (Safety cable not included)
Attach the safety cable that has already
been attached to the camera to the
ceiling slab or channel.
Make sure that the wire is attached
securely.
3.
Connect the video signal cable.
4.
Wrap insulation tape around cables.
As shown in the diagram to the left,
wrap insulation tape around the power
supply cable connection and BNC
connector. Insert the cables into the
hole in the ceiling.
MEMO
Wrapping the wires with insulation tape
improves handling as well as reducing
interference.
03e_tkc205_e.p65
05.4.1, 9:27 AM
12
