background image

5

Safety Warnings

•  A minimum distance of 5 cm around the 

unit should be maintained to allow for 

sufficient ventilation.

•  Do not install or place this unit in a 

bookcase, built-in cabinet or in another 

confined space. Ensure the unit is well 

ventilated.

Safety
•  Always disconnect the unit from the mains 

supply before connecting / disconnecting 

other devices or moving the unit.

•  Unplug the unit from the mains socket 

during a lightning storm.

•  In the interests of safety and to avoid 

unnecessary energy consumption, 

never leave the unit switched on while 

unattended for long periods of time, e.g. 

overnight, while on holiday or while out of 

the house. Switch it off and disconnect the 

mains plug from the mains socket.

Mains Cable
•  Make sure the unit or unit stand is not 

resting on top of the mains cable, as the 

weight of the unit may damage the mains 

cable and create a safety hazard.

•  If the mains cable is damaged it must be 

replaced by the manufacturer, its service 

agent, or similarly qualified persons in 

order to avoid a hazard.

Interference
•  Do not place the unit on or near appliances 

which may cause electromagnetic 

interference. If you do, it may adversely 

affect the operating performance of the 

unit, and cause a distorted picture or 

sound.

Batteries
•  Batteries used in the remote control for this 

unit are easily swallowed by young children 

and this is dangerous.

•  Keep loose batteries away from young 

children and make sure that the battery 

holder tray is secure in the remote control. 

Seek medical advice if you believe a cell 

has been swallowed.

•  Please dispose of batteries correctly by 

following the guidance in this manual.

Supervision
•  Children should be supervised to ensure 

that they do not play with the unit and the 

remote control.

•  Read all the instructions carefully before 

using the unit and keep them for future 

reference.

•  Retain the manual. If you pass the unit 

onto a third party make sure to include this 

manual.

•  Check that the voltage marked on the 

rating label matches your mains voltage.

Damage
•  Please inspect the unit for damage after 

unpacking.

•  Do not continue to operate the unit if you 

are in any doubt about it working normally, 

or if it is damaged in any way - switch off, 

withdraw the mains plug and consult your 

dealer.

Location of Unit
•  The unit must be placed on a flat stable 

surface and should not be subjected to 

vibrations.

•  Do not place the unit on sloped or unstable 

surfaces as the unit may fall off or tip over.

•  The mains socket must be located near the 

unit and should be easily accessible.

•  This unit is designed for indoor, domestic 

use only.

Temperature
•  Avoid extreme degrees of temperature, 

either hot or cold. Place the unit well away 

from heat sources such as radiators or gas / 

electric fires.

•  Avoid exposure to direct sunlight and other 

sources of heat.

Naked Flames
•  Never place any type of candle or naked 

flame on the top of or near the unit.

Moisture
•  To reduce the risk of fire, electric shock or 

product damage, do not expose this unit 

to rain, moisture, dripping or splashing. No 

objects filled with liquids, such as vases, 

should be placed on the unit.

•  If you spill any liquid into the unit, it can 

cause serious damage. Switch it off at the 

mains immediately. Withdraw the mains 

plug and consult your dealer.

Ventilation
•  To prevent the risk of electric shock or 

fire hazard due to overheating, ensure 

that curtains and other materials do not 

obstruct the ventilation vents.

TH-WL701B_703B_IB_140418_Annie.indd   5

18/4/14   7:14 pm

Summary of Contents for TH-WL701B





































Reviews: