17
This instruction manual explains the basic instructions for operating this unit. Unless otherwise stated, all
operations described are based on remote control use.
• To switch the unit off completely, remove the mains plug from the mains socket.
• Please turn the unit off completely to save energy when not in use.
Basic Operating
Standby / ON
When you fi rst connect the unit to the mains socket, the unit will be in Standby mode.
• During Standby mode, the standby indicator on the unit will light up red and the
Pair indicator on subwoofer will be blink slowly. Touch on the unit or press on the
remote control to switch the unit on. The status indicator of the last used mode will
light up and the subwoofer pair indicator will light up steadily.
• Touch on the unit or press on the remote control again to switch the unit back to
Standby mode and the standby indicator will light up steadily.
Automatic Power Off Function
The unit automatically turns to Standby mode after 15 minutes if the TV or the external
unit is disconnected or switched off in Optical mode or the volume is too close to mute in
AUX,
Bluetooth®
mode.
Selecting Modes
Press SOURCE repeatedly to switch between Bluetooth®, Optical, AUX 1 and AUX 2
modes. The selected mode indicator will light up.
• When AUX 1 mode is selected, the AUX 1/AUX 2 indicator will light up steadily.
• When AUX 2 mode is selected, the AUX 1/AUX 2 indicator will fl ash.
• If a TV or an external device is connected to AUX socket, the main unit and the subwoofer will switch
on automatically when the TV or the external device is switched on.
BUT in the following case, the unit will not switch on automatically in AUX mode:
− after automatic power off function is activated. For details, please refer to the section “Automatic
Power Off Function” below.
• If 2 external devices are connected to both AUX sockets, the soundbar will switch to the fi rst audio
signal input detected automatically.
