(No.MB180)1-9
3.1.2 Removing the front panel assembly
(See Figs.4 and 5)
• Prior to performing the following procedures, remove the top
cover.
(1) From the top side of the main body, disconnect the parallel
wires from the connectors
CN451
and
CN452
on the main
board. (See Fig.4)
(2) Remove the screw
C
attaching the earth wire to the main
board. (See Fig.4)
Reference:
When attaching the screw
C
, attach the earth wire with
it. (See Fig.4)
(3) From the bottom side of the main body, remove the four
screws
D
attaching the front panel assembly. (See Fig.5)
(4) Remove the front panel assembly in the direction of the ar-
row while releasing the joint
a
. (See Fig.5)
Fig.4
Fig.5
3.1.3 Removing the rear panel
(See Fig.6)
• Prior to performing the following procedures, remove the top
cover.
(1) From the back side of the main body, remove the four
screws
E
, screw
F
and ten screws
G
attaching the rear
panel.
Fig.6
C
CN452
Earth wire
Front panel assembly
CN451
Main board
D
D
Joint
a
Front panel assembly
E
G
Rear panel
F
G
