1-10 (No.MB428)
3.1.3 Removing the DVD changer mechanism assembly
(See Fig. 7)
• Prior to performing the following procedures, remove metal
cover and front panel assembly.
(1) From the top side of the main body, remove the screw
E
at-
taching the wire protection board to the main board.
(2) Take out the wire protection board, and disconnect the
card wires from the connectors (
CN401
to
CN403
) on the
main board.
Reference:
When attaching the wire protection board, attach the
wire protection board after connecting the card wires to
the connectors (
CN401
to
CN403
) on the main board.
(3) Remove the four screws
F
attaching the DVD changer
mechanism assembly on the bottom chassis.
(4) Take out the DVD changer mechanism assembly in the up-
ward direction.
Reference:
When attaching the DVD changer mechanism assembly, align
the holes of the DVD changer mechanism assembly to the pro-
jections
d
on the bottom chassis.
Fig.7
3.1.4 Removing the rear panel
(See Fig. 8)
• Prior to performing the following procedures, remove the metal
cover.
(1) From the back side of the main body, remove the screw
G
and ten screws
H
attaching the rear panel. (For A, UW, UY
and UG version)
(2) From the back side of the main body, remove the screw
G
and eleven screws
H
attaching the rear panel. (For UJ ver-
sion)
Fig.8
Main
board
CN402
Bottom
chassis
DVD changer mechanism assembly
Card wires
Wire protection board
F
F
F
Projections
d
CN401 CN403
E
G
H
Rear panel
(For A,UW,UY and UG version)
(For UJ version)
H
G
H
Rear panel
H