75
䡲
Whether or not zebra patterns should be displayed, and the
luminance level they should indicate, is selected by the
setting of the ZEBRA item on the DISPLAY [1/2] menu screen.
1.
Display the DISPLAY [1/2] menu screen.
1
Press the MENU button to display the TOP MENU screen.
2
Rotate the SELECT dial to select the DISPLAY SET item,
and then press the dial to display the DISPLA Y [1/2] menu
screen.
2.
Use the SELECT dial to select the ZEBRA item, and set the
item to a value other than OFF.
3.
When you return to the normal screen, zebra patterns will appear
in the appropriate areas.
4.
Manually adjust iris, gain and shutter speed until the zebra
patterns disappear.
MANUAL ADJUSTMENTS
Displaying Zebra Patterns
for Adjustment
Zebra patterns are oblique stripes than can be displayed to indicate very bright areas of the screen.
Areas where zebra patterns are indicated are likely to be blurred with white if left unadjusted. The zebra
patterns can be used as a reference for manual adjustment of the brightness to adjust to the optimal
level.
Zebra patterns
L C D B R I
D I S P L A Y [ 1 2 ]
/
G H T NE S S
N
A L
ORM
N
A L
ORM
N
A L
ORM
N
A L
ORM
N
A L
ORM
N
A L
ORM
L C D C O LOR
L C D P E AK I NG
V F B R I GH T N ES S
V F C O LO R
V F P E A K I NG
N E X T P AG E
P AGE B ACK
Z E BRA
7 0 ~ 8 0 %
DISPLAY [1/2] menu screen
●
Zebra patterns are not recorded
on the tape.
●
Zebra patterns are not output
from the VIDEO OUT or Y/C OUT
connectors.
Setting
Zebra Display
70 ~ 80%
Areas with a luminance level of 70% to 80%
85 ~ 95%
Areas with a luminance level of 85% to 95%
OVER 95%
Areas with a luminance level above 95%
OVER 100%
Areas with a luminance level above 100%
OFF
Not displayed
Memo:
In the VTR playback mode/DV input mode (when the MODE
switch is set to VTR), the ZEBRA item is not shown on the
DISPLAY [1/2] menu screen.
