Masterpage:Right+
EN
21
Filename [DVM600US_05Name.fm]
INITIAL SETTINGS
Page 21
Monday, 25 September 2006 13:54
You can select the monitor type depending on the TV used when
you play back DVD VIDEO discs recorded for wide-screen TVs.
1
Press
DVD
so that the DVD lamp lights up on the unit.
2
Press
SET UP
to access the Main Menu screen.
●
You cannot set the monitor type during recording or playback.
3
Press
selection keys
to select
A
FUNCTION SET UP
B
, then
press
G
.
4
Press
selection keys
to select
A
VIDEO IN/OUT
B
, then press
G
.
5
Press
selection keys
to select
A
MONITOR TYPE
B
, then
press
ENTER
.
6
Press
selection keys
to select
the desired option, then press
ENTER
.
7
Press
SET UP
to complete the setting.
* The
boldface
settings below indicate the settings at your purchase.
8
MONITOR TYPE
-
4:3LB
/ 4:3PS / 16:9AUTO / 16:9FIX
4:3LB
(Letter Box conversion):
Select this when the aspect ratio of your TV is 4:3 (conventional
TV). While viewing a wide screen picture, the black bars appear
on the top and the bottom of the screen.
4:3PS
(Pan&Scan):
Select this when the aspect ratio of your TV is 4:3 (conventional
TV). While viewing a wide screen picture, the black bars do not
appear; however, the left and right edges of the pictures will not
be shown on the screen.
16:9AUTO
(Wide television conversion):
Select this when the aspect ratio of your TV is 16:9 (wide TV).
16:9FIX
(Wide television conversion):
Select this when the aspect ratio of your TV is fixed to 16:9
(wide TV). The unit automatically adjusts the screen width of
the output signal correctly when playing back a picture whose
aspect ratio is 4:3.
Pan&Scan/Letter Box
In general, DVD VIDEO disc are produced for a wide-screen TV
with 16:9 aspect ratio.
Material with this ratio will not fit to a TV with 4:3 aspect ratio.
There are two styles to display the image,
(PS) and
(LB).
Pan&Scan
The right and left side of the image are cut off.
The image fills the screen.
●
The picture will be shown in the
A
4:3LB
B
mode depending on the disc even if the
A
4:3PS
B
mode is selected.
Letter Box
Black bands appear at the top and bottom of
the image. The image itself appears in 16:9
aspect ratio.
Monitor Set
●
Turn on the unit.
●
Turn on the TV and select the AV mode.
●
Slide the
TV/DVD
switch to
DVD
.
FGDE
ENTER
SET UP
DVD
DVD
TV
Selection Keys
ENTER
SELECT
SET UP
EXIT
DVD VIDEO SET UP
MONITOR TYPE
HDD/DVD SET UP
FUNCTION SET UP
INITIAL SET UP
REC/PLAY SET UP
DISPLAY SET
FRONT AUX F-1
REAR AUX L-1
VIDEO IN/OUT
VIDEO
VIDEO
4:3LB
SELECT WITH @
PRESS [SET UP] TO EXIT
THEN PRESS [ENTER]
DVM600US_00.book Page 21 Monday, September 25, 2006 1:54 PM
