1-30 (No.MB511)
3.3.10 Removing the rack holder assembly / sensor assembly
Attention:
If the slide gear of the body places at joint
u
of the rack holder
assembly, turn the 1 gear counterclockwise to move the slide
gear toward the front. Remove the rack holder assembly.
(1) Remove the three screws
N
attaching the rack holder as-
sembly. Release joint
u
from the notch.
Caution:
When reattaching the rack holder assembly, do not nip
the wire
v
extending from the sensor assembly.
(2) Move the sensor assembly in the direction of the arrow to
release from slot at joint
y
.
(3) Remove the spring attached to the bottom of the sensor as-
sembly from the boss
z
on the sensor slider.
(4) Remove the screw
P
and
Q
attaching the sensor board and
SV resister respectively. If necessary, unsolder the sensor
board.
Caution:
When reattaching the SV resister, attach the sensor slider to
the sensor bracket and fit the lever on the bottom of the SC re-
sister into slot
a'
of the sensor slider.
Caution:
When reattaching the rack holder assembly, turn the 1 gear
clockwise to move the slide gear and slide lever inside the
body rearward.
• Let the wire extending from the sensor assembly through
notch
x
to the bottom of the body.
• Fix pin
c'
of the slide lever into hole
b'
on the sensor slider
on the bottom of the sensor assembly while attaching the
spring to the boss
z
of the sensor slider.
• Engage joint
y
of the sensor assembly to the notch of the
body.
Fig.25
Fig.26
N
Switch board
N
N
N
u
v
Rack holder
assembly
1 gear
Summary of Contents for SP-PWC40
Page 70: ... M E M O ...
