16
Aux Operation
1. Make sure the speaker is disconnected at the
mains socket.
2. Use a supplied 3.5mm to 3.5mm AUX cable to
connect your audio device through the AUX IN
socket at the rear of the speaker.
3. Connect the mains plug to the mains socket
and switch the POWER ON/OFF switch at the
rear of the speaker to the ON position. The
speaker will enter standby mode. The indicator
light will be on but dim to show the speaker is
in standby mode.
4. Press the STANDBY button on the remote
control or the STANDBY button on the speaker
to switch the speaker on.
5. Select AUX mode by repeatedly pressing the
SOURCE button on the speaker or SOURCE
button on the remote control. The Aux
indicator will now light brighter to show Aux
mode is selected.
6. In AUX mode only the /– controls
and MUTE button can be controlled using the
remote control. Use the controls on the device
for all other functions.
Maintenance
Cleaning the Speaker
Ensure to unplug the speaker from the mains socket before cleaning.
• To clean the speaker, wipe the case with a slightly moist, lint-free cloth.
• Do not use any cleaning fluids containing alcohol, ammonia or abrasives.
• Do not spray aerosol at or near the radio.
SP-AD300_IB.indd 16
17/04/2015 10:41
