KD-S890
(No.49799)1-5
2.1.3 Removing the heat sink (See Fig.5)
(1) Remove the two screws
B
and two screws
C
on the left
side of the main body.
Fig.5
2.1.4 Removing the bottom cover (See Figs.6 and 7)
• Prior to performing the following procedure, remove the front
panel assembly, front chassis assembly and heat sink.
(1) Turn over the main body, and release the two joints
d
, two
joints
e
and joint
f
.
CAUTION:
Do not damage the main board when releasing the joint
f
using
a screwdriver. (See Figs.6 and 7)
Fig.6
Fig.7
2.1.5 Removing the rear bracket (See Fig.8)
• Prior to performing the following procedure, remove the front
panel assembly, front chassis assembly, heat sink and bottom
cover.
(1) Remove the three screws
D
, three screws
E
and two
screws
F
on the back side of the main body.
(2) Remove the rear bracket.
Fig.8
B
C
Heat sink
Joint
d
Joint
e
Joint
f
Bottom cover
Joint
e
Joint
d
Joint
f
Bottom cover
E
F
D
D
E
Rear bracket
