(No.MB502)1-7
3.3
Removing the rear panel
(See Fig.4)
• Prior to performing the following procedure, remove the top
cover and stay bracket.
(1) From the back side of the main body, remove the strain re-
lief from the rear panel in the direction of the arrow.
(2) Remove the thirty screws
F
attaching the rear panel.
Fig.4
3.4
Removing the component board and tuner unit
(See Figs.5 and 6)
• Prior to performing the following procedure, remove the top
cover and stay bracket.
(1) From the top side of the main body, disconnect the parallel
wire from the connector
CN511
on the S-video board. (See
Fig.5)
(2) From the back side of the main body, remove the four
screws
G
attaching the component board. (See Fig.6)
(3) From the top side of the main body, disconnect the card
wire from the connector
CN1
on the tuner unit. (See Fig.5)
(4) From the back side of the main body, remove the two
screws
H
attaching the tuner unit. (See Fig.6)
Fig.5
Fig.6
Rear panel
F
F
Strain relief
F
CN511
S-Video board
Component board
Tuner
CN1
H
G
Rear panel
