JVC RX-E111RSL Instructions Manual Download Page 42

Page: 42 / 51

❏

Turning off the sound temporarily
—MUTING button

(see also page 12)

Turn on or off the sound output.

❏

Turning off the power with the Sleep Timer
—SLEEP button

(see also page 12)

Set the shut-off time until the unit turns off
automatically.

❏

Changing the display brightness
—DIMMER button

(see also page 12)

Dim or brighten the display illuminations.

❏

Selecting the analogue or digital input—
ANALOG/DIGITAL INPUT button

(see also page 13)

Select either analogue input or digital input
for the digital source.

❏

Creating realistic sound fields—SURROUND
ON/OFF and SURROUND MODE buttons

(see also pages 32 – 35)

SURROUND ON/OFF

Turn on or off Surround mode.

SURROUND MODE

Select the Surround modes.
Each time you press the button,
the Surround modes change.

❏

Reinforcing the Bass—BASS BOOST button

(see also page 21)

Turn on or off Bass Boost.

❏

Adjusting the sound—SOUND, TEST, EFFECT
buttons

(see also pages 33 – 35)

SOUND

: Change the functions of 10 keys,

and make them work for sound
adjustments.

TEST

: Turn on or off the test tone

output.

EFFECT

: Change the DAP effect level.

You can use the remote control to operate not only this
unit but also other JVC’s products.

• Refer also to the manuals supplied for the other products.

– This remote control can operate a VCR whose remote

control code is set to A.

• To operate the other products, aim the remote control

directly at the remote sensor on the target product.

Mastering Remote Operations

AUDIO

DVD

STB

VCR

DVD

STB

VCR

ANALOG/DIGITAL

TAPE

INPUT

MUTING

VOLUME

TV DIRECT

SLEEP

■

Operating this unit

❏

Turning on the power—POWER buttons

(see also page 10)

AUDIO

Turn off this unit.

AUDIO

: Turn on this unit.

❏

Selecting the source to play—Source
selecting buttons

(see also page 10)

DVD

: Select the DVD player.

STB

: Select the STB.

VCR

: Select the VCR.

: Select the TV.

TAPE

: Select the cassette recorder.

: Select the FM band.

: Select the AM band.

These buttons also change the functions of the 10 keys, and
make them work to operate the target source components. (See
the next page.)

❏

Adjusting the volume—VOLUME buttons

(see also page 10)

Adjust the volume level.

❏

Activating TV Direct—TV DIRECT
button

(see also page 11)

Activate the TV Direct.

DIMMER

ANALOG/DIGITAL

INPUT

MODE

ON/OFF

SURROUND

TEST

EFFECT

SOUND

BASS BOOST

EN38-46.RX-E111&112RSL[B]_f

02.1.17, 9:21 AM

Summary of Contents for RX-E111RSL




















































Search results

Summary of Contents for RX-E111RSL

Reviews:

Brands by name

Popular brands

JVC RX-E111RSL, Instructions Manual

Search results

Summary of Contents for RX-E111RSL

Reviews:

Brands by name

Popular brands