1-8 (No.MB448)
3.1.3 Removing the front panel assembly
(See Figs.4 and 5)
• Remove the top cover and HDMI board.
(1) From the top side of the main body, remove the tie band
bundling the wires. (See Fig.4.)
Reference:
After reassembling, bundle the wires with a new tie band
as before. (See Fig.4.)
(2) Release the wire holders bundling the wires. (See Fig.4)
(3) Disconnect the card wire from the connector
CN102
on the
main amplifier board. (See Fig.4)
(4) Disconnect the wire from the connector
CN351
on the main
amplifier board. (See Fig.4)
(5) Disconnect the wire from the connector
CN552
on the input
board. (See Fig.4)
(6) Disconnect the wire from the connector
CN661
on the DSP
board. (See Fig.4)
(7) Remove the three screws
F
attaching the front panel as-
sembly. (See Fig.4)
(8) Remove the screw
F
attaching the OSD connect 2 board.
(See Fig.4)
(9) From the bottom side of the main body, remove the four
screws
F
attaching the front panel assembly. (See Fig.5)
(10) Release the joints
a
and remove the front panel assembly
in the direction of the arrow. (See Fig.5)
Fig.4
Fig.5
F
F
Tie band
Wire holders
Wire holder
CN552
Input board
CN661
CN351
DSP board
OSD connect 2 board
CN102
F
F
Wire holder
Main amplifier board
F
Front panel assembly
F
a
Summary of Contents for RX-D402B
Page 23: ... M E M O ...
Page 85: ...3 25 MEMO ...
