(No.MB534)1-9
3.1.10 Removing the primary board
(See Fig.9)
• Remove the top cover.
Reference:
Remove the tie band bundling the wires.
(1) From the top side of the main board, remove the wires from
the connectors (
CN120
,
CN121
) on the primary board.
(2) Disconnect the wires from the connector
CN122
on the
regulator board 1.
(3) Remove the two screws
K
attaching the primary board.
(4) Take out the primary board from the main body.
3.1.11 Removing the regulator board 1
(See Fig.9)
• Remove the top cover and video board.
Reference:
Remove the tie band bundling the wires.
(1) From the top side of the main board, remove the wires from
the connectors (
CN106
,
CN102
,
CN122
) on the regulator
board 1.
(2) Disconnect the wires from the connectors (
CN506
,
CN507
)
on the input board.
(3) Disconnect the wire from the connector
CN105
on the main
amplifier board.
(4) Remove the four screws
M
attaching the regulator board 1.
(5) Take out the regulator board 1 from the main body.
Fig.9
CN120
CN122
CN106
CN102
CN506
CN507
Main amplifier board
Input board
Primary board
K
M
M
M
K
CN121
CN111 CN105
Regulator board 1
Summary of Contents for RX-D205SJ
Page 17: ... M E M O ...