(No.MB364)1-9
3.1.3 Removing the rear panel
(See Fig.5)
• Remove the top cover.
(1) From the back side of the main body, remove the strain re-
lief from the rear panel in the direction of the arrow and re-
move the power cord.
(2) Remove the twenty-four screws
F
attaching the rear panel.
Fig.5
3.1.4 Removing the tuner
(See Fig.6)
• Remove the top cover.
(1) From the top side of the main body, disconnect the card
wire from the connector
CN1
on the tuner.
(2) From the back side of the main body, remove the two
screws
G
attaching the tuner to the rear panel and take out
the tuner.
3.1.5 Removing the subwoofer board
(See Fig.6)
• Remove the top cover.
(1) From the top side of the main body, disconnect the wire
from the connector
CN524
on the subwoofer board.
(2) From the back side of the main body, remove the screw
H
attaching the subwoofer board to the rear panel and take
out the subwoofer board.
3.1.6 Removing the compulink board
(See Fig.6)
• Remove the top cover.
(1) From the top side of the main body, disconnect the wire
from the connector
CN565
on the compulink board.
(2) From the back side of the main body, remove the screw
J
attaching the compulink board to the rear panel and take
out the compulink board.
Fig.6
Strain relief
F
Rear panel
Power cord
F
F
J
Tuner
CN524
Rear panel
G H
Rear panel
Subwoofer board
CN1
CN565
Compulink board
Summary of Contents for RX-D201S - AV Receiver
Page 23: ... M E M O ...
