JVC RX-884PBK Instructions Manual Download Page 68

Page: 68 / 82

English

IMPORTANT:

To operate JVC’s audio components using this remote control:
•

You need to connect JVC audio components through the COMPU LINK-3
(SYNCHRO) jacks (see page 55) in addition to the connections using cables
with RCA pin plugs (see page 9) or using digital cables (see page 12).

•

Aim the remote control directly at the remote sensor on the receiver.

Tuner

After pressing FM/AM (with the remote control mode selector
set to “AUDIO/TV/VCR”), you can perform the following
operations:
FM/AM:

Alternates between FM and AM (MW/
LW).

1 – 10, +10:

Selects a preset channel number directly.
For channel number 5, press 5. For
channel number 15, press +10, then 5.
For channel number 20, press +10, then
10.

PTY SEARCH:

Searches for a program by PTY codes.

PTY +/–:

Selects the PTY codes.

DISPLAY MODE:

Shows the RDS signals.

FM MODE/MUTE: Changes the FM reception mode.

Sound control section (Amplifier)

You can always perform the following operations (with the
remote control mode selector set to “AUDIO/TV/VCR”):
SURROUND MODE: Changes the DSP modes.

After pressing SOUND CONTROL (with the remote control
mode selector set to “AUDIO/TV/VCR”), you can perform the
following operations:
SEA MODE:

Changes the SEA modes.

SUB/–:

Adjusts the subwoofer output level.

CNTR +/–:

Adjusts the center speaker output
level.

REAR•L +/–:

Adjusts the left rear speaker output
level.

REAR•R +/–:

Adjusts the right rear speaker output level.

EFFECT:

Selects the effect level.

TEST:

Turns on or off the test tone output.

CNTR TONE:

Selects the center tone.

CD player

After pressing CD (with the remote control mode selector set to “AUDIO/TV/VCR”),
you can perform the following operations on a CD player:
PLAY:

Starts playing.

Returns to the beginning of the current (or previous) track.

Skips to the beginning of the next track.

STOP:

Stops playing.

PAUSE:

Pauses playing. To release it, press PLAY.

1 – 10, +10:

Selects a track number directly.
For track number 5, press 5. For track number 15, press +10, then 5. For
track number 20, press +10, then 10. For track number 30, press +10,
+10, then 10.

Notes:

• If you use the buttons on the

front panel or the menu
function to choose a source,
the remote control will not
operate that source. To
operate a source with the
remote control, the source
must be selected using
buttons on the remote control.

• Check to see if its remote

control mode selector is set to
the correct position. To
operate audio system, TVs,
and VCRs, set it to “AUDIO/
TV/VCR.”

• Refer also to the manuals

supplied with your
components.

Note:

After adjusting sounds, press
the corresponding source
selecting button or CD DISC to
operate your target source by
using 10 keys; otherwise, 10
keys cannot be used for
operating your target source.

Operating JVC’s Audio/Video Components

You can operate JVC’s audio and video components with this receiver’s remote control, since control
signals for JVC components are preset in the remote control.

RM-SR884RU REMOTE CONTROL

SOUND

CONTROL

DISC

VCR1

ANALOG

/DIGITAL

AUDIO

DVD

VCR1

VIDEO

VCR2