38
5
Try to operate your CATV converter or DBS
tuner by pressing CATV/DBS
.
When your CATV converter or DBS tuner turns on or off, you
have entered the correct codes.
If there are more than one code listed for your brand of
CATV converter or DBS tuner,
try each one until the correct
one is entered.
Note:
You cannot use both the CATV converter and DBS tuner at the same
time.
To change the transmittable signals for
operating a VCR
1
Press and hold VCR
.
2
Press VCR.
3
Enter manufacturer’s codes using buttons 1 – 9,
and 0.
4
Release VCR
.
Now, you can perform the following operations on the VCR.
VCR
: Turn on or off the VCR.
After pressing VCR, you can perform the following operations
on the VCR:
CH +/–
: Change the channels.
1 – 9, 0, +10 (100+)
: Select the channels.
10
: Function as ENTER button.
3
: Start playback.
FF
: Fast-wind a tape.
REW
: Rewind a tape.
7
: Stop playback or recording.
8
: Pause playback. To release it, press
3
3
3
3
3
.
REC PAUSE
: Press this button to enter recording
pause.
Then press
3
to start recording.
Note:
Refer also to the manual supplied with your VCR.
5
Try to operate your VCR by pressing
VCR
.
When your VCR turns on or off, you have entered the correct
codes.
If there are more than one code listed for your brand of
VCR,
try each one until the correct one is entered.
Operating Other Manufacturers’ Video Equipment
Manufacturers’ codes for CATV converter
Manufacturer
Codes
GENERAL INSTRUMENT
06, 07, 08, 09, 10,
11, 12, 13, 14, 29
HAMLIN/REGAL
01, 02, 03, 04, 05
JERROLD
06, 07, 08, 09, 10,
11, 12, 13, 14
OAK
15, 16, 17
PANASONIC
18, 19, 20
PIONEER
21, 22
SCIENTIFIC ATLANTA
23, 24, 25
TOCOM
26
ZENITH
27, 28
Manufacturers’ codes are subject to change without
notice. If they are changed, this remote control cannot
operate the equipment.
Manufacturer
Codes
JVC
56, 57
*
, 67
AMSTRAD
43, 44, 45, 46, 47
BLAUPUNKT
30
ECHOSTAR
50, 51, 67
GOLDSTAR
31
GRUNDIG
32, 33
HIRSHMANN
48, 52, 53, 55
INSTRUMENT
68
ITT/NOKIA
34
KATHREIN
52, 58, 61, 62, 63
NEC
35, 36
ORBITECH
48
PHILIPS
37, 38
RCA
65
SAMSUNG
39, 40
SCHWAIGER
61, 64
SIEMENS
41, 42
SONY
66
TECHNISAT
48
Manufacturers’ codes for DBS tuner
*
“57” is the initial setting.
Manufacturers’ codes are subject to change without
notice. If they are changed, this remote control cannot
operate the equipment.
EN30-42.RX-7020V[J]f
01.12.27, 3:37 PM
38
