JVC RX-554RBK Instructions Manual Download Page 14

Page: 14 / 48

English

Basic Operations

The following operations are commonly used when you play any sound source.

Turning the Power On and Off (Standby)

On the front panel:

To turn on the power, press STANDBY/ON

The STANDBY lamp goes off. The name of the current
source (or station frequency) appears on the display.

To turn off the power (into standby mode), press STANDBY/ON

again.

The STANDBY lamp lights up.

From the remote control:

To turn on the power, press AUDIO.
The STANDBY lamp goes off. The name of the current
source (or station frequency) appears on the display.

To turn off the power (into standby mode), press AUDIO again.
The STANDBY lamp lights up.

Selecting the Source to Play

On the front panel:

1. Press SOURCE so that the Control

buttons

work for selecting the source.
The lamp above the button lights up.

2. Press Control

until the source name you want

appears on the display.

From the remote control:

Press one of the source buttons directly.

CD*

Listen to the CD player.

TAPE*

Listen to the cassette deck.

TUNER/BAND* Listen to the radio. Each time you press the

button, the band alternates between FM and
AM (MW/LW).

VCR

View the playback picture from the VCR.

VIDEO

View the video component connected to the
VIDEO jacks.

PHONO*

Listen to a record.

Note:

When you press one of the
source buttons on the remote
control marked with an asterisk
(*), the receiver automatically
turns on.

Current source name appears

Current volume
level is shown here

AUDIO

TAPE

TUNER/

BAND

VCR

VIDEO

PHONO

VOLUME

Note:

A small amount of power is
consumed in standby mode. To
turn the power off completely,
press

POWER to set it in the

—

OFF position on the front panel.

MUTE TUNED

SLEEP SEA 3D-PHONIC

AUTO STEREO PRO LOGIC 3CH LOGIC HALL

LOUDNESS

DAP

VOLUME

CH-

TA
NEWS

MHz

kHz

INFO

STANDBY/ON

STANDBY

SOURCE

RX-554RBK(EE)_0118-001A_En01-23

98.1.30, 2:19 PM

Summary of Contents for RX-554RBK

















































Search results

Summary of Contents for RX-554RBK

Reviews:

Brands by name

Popular brands

JVC RX-554RBK, Instructions Manual

Search results

Summary of Contents for RX-554RBK

Reviews:

Brands by name

Popular brands