32
Specifications
Designs & specifications are subject to change without notice.
Amplifier
Output Power
At Stereo operation:
Front channels:
100 W per channel, min. RMS, both channels driven into 8
Ω
at
1 kHz with no more than 0.9% total harmonic distortion.
(IEC268-3/DIN)
At Surround operation:
Front channels:
100 W per channel, min. RMS, driven into 8
Ω
at 1 kHz with no
more than 0.8% total harmonic distortion.
Center channel:
100 W, min. RMS, driven into 8
Ω
at 1 kHz, with no more than
0.8% total harmonic distortion.
Rear channels:
100 W per channel, min. RMS, driven into 8
Ω
at 1 kHz, with no
more than 0.8% total harmonic distortion.
Audio
Audio Input Sensitivity/Impedance (1 kHz):
CD, TAPE/CDR, TV SOUND, VCR, DVD:
220 mV/47 k
Ω
Audio Input (DIGITAL IN)* :
Coaxial: DIGITAL 1 (DVD):
0.5 V (p-p)/75
Ω
Optical: DIGITAL 2 (CD):
–21 dBm to –15 dBm (660 nm ±30 nm)
* Corresponding to Linear PCM, Dolby Digital, and DTS Digital Surround
(with sampling frequency — 32 kHz, 44.1 kHz, 48 kHz).
Audio Output Level:
TAPE/CDR, VCR:
220 mV
Signal-to-Noise Ratio (’66 IHF/DIN):
CD, TAPE/CDR, TV SOUND, VCR, DVD: 87 dB/67 dB
Frequency Response (8
Ω
):
CD, TAPE/CDR, TV SOUND, VCR, DVD: 20 Hz to 20 kHz (±1 dB)
Tone Control:
Bass (100 Hz):
±10 dB
Treble (10 kHz):
±10 dB
Video
Video Input Sensitivity/Impedance:
Composite video:
VCR, DVD:
1 V (p-p)/75
Ω
Video Output Level/Impedance:
Composite video:
VCR, MONITOR OUT:
1 V (p-p)/75
Ω
Synchronization:
Negative
Signal-to-Noise Ratio:
45 dB
FM tuner (IHF)
Tuning Range:
87.50 MHz to 108.00 MHz
Usable Sensitivity:
Monaural:
17.0 dBf (1.95 µV/75
Ω
)
50 dB Quieting Sensitivity:
Monaural:
21.3 dBf (3.2 µV/75
Ω
)
Stereo:
41.3 dBf (31.5 µV/75
Ω
)
Signal-to-Noise Ratio (IHF-A weighted):
Monaural:
78 dB at 85 dBf
Stereo:
73 dB at 85 dBf
Total Harmonic Distortion:
Monaural:
0.4% at 1 kHz
Stereo:
0.6% at 1 kHz
Stereo Separation at REC OUT:
35 dB at 1 kHz
Alternate Channel Selectivity:
45 dB: (±400 kHz)
Frequency Response:
30 Hz to 15 kHz: (+0.5 dB, –3 dB)
AM tuner
Tuning Range:
MW:
522 kHz to 1 629 kHz
LW:
144 kHz to 288 kHz
Usable Sensitivity:
Loop antenna:
400 µV/m
Signal-to-Noise Ratio:
50 dB (100 mV/m)
General
Power Requirements:
AC 230V
, 50 Hz
Power Consumption:
200 W (at operation)
2 W (in standby mode)
Dimensions (W x H x D):
435 mm x 146.5 mm x 416 mm
(17
3
/
16
in. x 5
13
/
16
in. x 16
7
/
16
in.)
Mass:
8.8 kg (19.5 lbs)
Troubleshooting / Specifications
EN27-32.RX-5022RSL[B]_f
02.1.16, 5:34 PM
32
