17
Manual tuning of ensembles
• Press the
"MENU"
button on the device to enter the DAB menu.
• Press the
button until
"Manual tune"
appears in the Display.
• Pressing the
u
II
button confirms the function and the currently set channel with the corresponding
frequency is shown in the display.
• Press the
button to manually select another channel.
• Press
u
II
to confirm the selection. After that, the signal level is shown in the display, another
press
loads the current ensemble.
Selecting a DAB + station
The stations stored alphabetically in the station list can be called up as follows:
• Press the
TUN+
or
TUN-
button on the remote control to scroll backwards or forwards in the
station list.
• When the desired station is selected, press the
u
II
button on the remote control to start playback.
The Display will show
"Playing".
• If the reception level on the selected station is insufficient for trouble-free playback,
"Service not
available"
appears in the display. In this case please select another station.
Storing stations in the station memory
T
o store DAB stations for easier retrieval, 30 memory slots are available. To assign the memory, please
proceed as follows:
• Select a station to save
• Press the
PRG
button until the
"Preset Store"
and a memory location is showed on the Display.
An empty memory location is displayed with
"Empty"
, an assigned memory space with the name of
the sender. You can also reassign an already assigned memory.
• Use the
or
buttons to select a memory location.
• Briefly press the
u
II button to save the station.
The display briefly shows
"Preset X Stored"
.
• The stations can now be selected using the
or
button on the device.
