Built-in PAN, TILT, and ZOOM
Controls
The RM-P2580 lets you select any of
eight JVC TK-C675B cameras it
controls in a surveillance network.
Then, using push-buttons and joy stick
you can control pan, tilt, and zoom to
scan an area or focus on a specific
action. You can also fine-tune picture
quality using Focus and Iris controls.
Auto Panning
Using the remote controller, you can
program automatic panning
movements of individual cameras.
A camera set up for automatic
panning constantly patrols the area
under surveillance with low-speed
horizontal camera movements between
two designated points at a constant
time interval.
Auto Sequence Mode
Press the Auto switch and the
RM-P2580 enters the Auto Sequence
Mode. Using a built-in sequential
switcher the controller sequentially
displays the images captured by a
network of up to eight CCTV cameras.
The cameras are selected in preset
number order with images displayed for
a fixed period.
Auto Patrol Mode
The Auto Patrol Mode provides three
Preset Sequence Mode settings and
64 presettings for surveillance coverage
of a designated area by random or
sequential panning. So you can set up
high-speed camera movements
between multiple pre-set positions in
the sequence and the time intervals of
your choice. You can also use this
function for individual or multiple
cameras.
Auto Alarm Operation
Operation of the RM-P2580 can be
interlocked with peripheral alarm
equipment connected through
Data I/O Terminals at the back of the
unit. The user can then select operation
in either Alarm Priority or Manual
Priority mode. With the Alarm Priority
mode selected, the controller interrupts
the programed operation automatically
at the shot by the camera for which the
alarm signal is received. The controller
also issues visual and audio alarms,
while indicating the camera ID number
on the Camera Display. In Manual
Priority mode only the camera ID is
displayed with all operations remaining
unaffected.
Input/Output Terminals
The RM-P2580 is equipped with a full
range of input/output terminals. These
let you hook the controller up to a bank
of eight monitors, with one monitor
allocated to each camera, as well as
alarm equipment and time-lapse VCR.
The unit’s RS-485 Connection allows
cascaded connection of cameras.
Area Title
The RM-P2580 also takes advantage
of the Area Title function of the
TK-C675B. This innovative function
divides the space covered by a camera
into 16 units, with a 16-character ID
allocated to each unit. At the touch of a
button you can accurately position the
camera to view a designated area.
Key Lock Function
Activating Key Lock disables the joy
stick and operating push-buttons on
the control panel to prevent operating
errors.
RS-232C Interface
The RM-P2580 comes with an
RS-232C terminal to allow control
external components.
POSITION display
AUTO PATROL button
AUTO PAN
button
PAN/TILT
control lever
POSITION display
SET button
Camera 1
Camera 2
Camera 3
Camera 6
Camera 5
Camera 4
POSITION display
Lights up.
AUTO button
CAMERA display
q
@3
we rty
u
i
o
!0
!1
!3 !2
!4
!5
!6
!7
!8
!9
@0
@1
@2
@9
@8
@7
@6
@5
@4
#4
#3
#1 #0
#2
q
[MENU] button (with an indicator)
w
[SET] button
e
[ALARM] indicator
r
[POWER] indicator
t
[KEY LOCK] indicator
y
[CAMERA] display
u
[POSITION] display
i
[AUTO] button
o
[F1, F2, F3] Function buttons
!0
[CAMERA] button
!1
[POSITION] button
!2
[PAN/TILT] control lever
!3
[OPTION 1,2]
!4
[AUTO PATROL] button
!5
[-,+] Negative and positive buttons
!6
[AUTO PAN] button
!7
[ENTER] button
!8
[1 to 0/HOME] Numeric key buttons
!9
[CLEAR] button
@0
[ZOOM WIDE, TELE] ZOOM control
buttons
@1
[FOCUS NEAR, FAR] FOCUS control
buttons
@2
[IRIS CLOSE, OPEN] Iris control buttons
@3
[SPEED] Speed button and indicators
@4
[AC~INPUT] AC power input connector
@5
[POWER] switch
@6
[TO CAMERA] Camera control signal
connectors
@7
[DATA I/O] Data signal input/output
terminals
@8
[SERIAL-1] External extension connector 1
(D-sub 9-pin male connector)
@9
[SERIAL-2] External extension connector 2
(D-sub 9-pin male connector)
#0
[MONITOR OUTPUT 2] Video signal
output connector 2
#1
[MONITOR OUTPUT 1] Video signal
output connector 1
#2
[VIDEO INPUT] Video signal input
connectors
#3
[VIDEO OUTPUT] Video signal output
connectors
#4
DIP switch
Controls, Connectors and
Indicators
