9
[LEVEL] level adjustment knob:
For adjusting the gamma level.
Note:
�
The feature is not available on the camera if the light of
the corresponding button is not lit. Control using this unit
is disabled in this case.
H
[BLACK] Black Control Unit
For switching the gain value of dark areas. Switch using the
video signals to be shot.
[STRETCH] Stretch button:
Enhances the contrast of dark areas in an image by
stretching only the signals of the dark areas.
[COMPRESS] Compress button:
Compresses the gain value of dark areas to enhance the
contrast when the image shot is bright and has little contrast.
Memo:
�
When both buttons light up in green, or when one button
lights up in green and the other is not lit, the setting
becomes
�
NORMAL
B
(no correction).
Note:
�
The feature is not available on the camera if the light of
the corresponding button is not lit. Control using this unit
is disabled in this case.
I
White Balance Control Unit (
A
17 page)
For specifying the white balance settings.
�
[WHITE BALANCE MODE] White Balance Mode
selection button
For setting the white balance mode.
The indicator of the selected mode lights up in orange.
�
[AUTO WHITE] Auto White button
Pressing this button when [WHITE BALANCE MODE] is set
to
�
AW A
B
or
�
AW B
B
lights up the button in orange and
starts up the auto white feature.
After the adjustment is complete, the result is indicated by
the indicator.
Note:
�
When [WHITE BALANCE MODE] is set to
�
MANUAL
B
,
�
PRESET
B
, or
�
FAW
B
, this button is not lit, and auto white
does not start up.
�
Setting the [BARS] button
S
to
�
ON
B
outputs a color bar
image. In this case, this button is not lit, and auto white
does not start up.
�
[PAINT] Paint button and indicator light:
When [WHITE BALANCE MODE] is set to
�
AW A
B
or
�
AW
B
B
, you can specify whether fine-tuning on the value stored
at the camera is to be performed.
In addition, when [WHITE BALANCE MODE] is set to
�
MANUAL
B
, the orange light turns on, and adjustment of the
R/B channel's gain value using the [WHITE PAINT R/B] knob
is enabled.
Note:
�
After the auto white operation is complete, this button is
indicated as
�
OFF
B
(green light on).
�
When [WHITE BALANCE MODE] is set to
�
PRESET
B
or
�
FAW
B
, this button is not lit, and the [WHITE PAINT R/B]
knob control is disabled.
�
[WHITE PAINT R/B]White Paint R/B adjustment knob:
The functions available differs according to the white balance
mode button selected.
Memo:
�
You can select the corresponding white balance mode
button to store settings for
�
MANUAL
B
,
�
AW A
B
, and
�
AW
B
B
respectively.
Setting Value
Function
MANUAL
White balance value that is set using the
White Paint R/B adjustment knob is used.
PRESET
The preset white balance value (3200K) is
used.
FAW
Switches to the FAW (Full-time Auto White
Balance) mode, and white balance is
automatically adjusted to an appropriate
value.
AW A
The value stored in the camera's auto
white balance memory A or B is used.
AW B
LEVEL
G�MM�
Decreases the
reproducibility of dark
areas.
Enhances the
reproducibility of dark
areas.
Lights up in green
Auto white is successfully
completed.
Blinks in orange
B
Lights up in green
Auto white is abnormally
terminated.
ON
(Orange light on)
Fine-tuning enabled.
Adjust by turning the [WHITE
PAINT R/B] knob.
OFF
(Green light on)
Fine-tuning disabled.
The [WHITE PAINT R/B] knob is
disabled.
Setting of
White Balance
Mode
Selection
Button
Feature of White Paint
Knob
Status of
Paint
Indicator
Light
MANUAL
Knob for adjusting the R/B
channel's gain value.
Lit
PRESET/FAW
Disabled.
Not lit
AW A
Knob for fine-tuning the
white balance value
obtained during auto
white balance adjustment.
Lit
AW B
