JVC RD-E661B-DAB, Instruction Manual

Page: 7 / 88

EN
4. To turn off the radio, press the
FUNC.
button or remote control to switch to other functions
or press STANDBY button to turn off the unit.
RADIO AUTO SCAN (SEARCH)
Press an hold the /SCAN/SELECT button, the unit will conduct auto scan and program until
having found a strong signal. The unit will start to broadcast the P01 after searching finished.
Press the 10/FOLD./M.+ or /M.- button on or remote control unit to choose next/previous
programmed station.
RADIO STATION MEMORY OPERATION
You may pre-store 30 (FM) radio stations in memory for your preference, so as you can listen
to your desired station directly and quickly, no need to tuning and search for again.
1. Rotate the TUNING knob on the unit to select the first desired station.
2. Press and hold the PROG./MEM. button on unit or MEMORY key on remote control,
“
PRESET STORE
” will flash on the display. Press the
/TUN+
or
/TUN-
button to choo-
se the desired sequence you want to store, then press the the /SCAN/SELECT button
again to confirm.
3. Search another station, repeat steps (1) & (2) until all desired stations stored. Up to 30
stations can be programmed.
4. Press the
10/FOLD./M.+
or
/M.-
button to listen to the stored station directly.
DAB RADIO OPERATION
DAB radio mode receives DAB/DAB+ digital radio and displays information about the station
and programmed/track as broadcast. Press the FUNC. button until display reads
“ Welcome to DAB ”.
SYSTEM
The system setting allows you to select display languages, reset to factory settings and view
the software version.
LANGUAGE
To select different languages for display messages. Press and hold the /MENU/INFO button
to enter menu selection, select the “ System ” option and press the /SCAN/SELECT button
to enter, select “ Language ” then press the /TUN+ or /TUN- button to choose the desired
language to be displayed, then press the /SCAN/SELECT button to confirm.
FACTORY RESET
Factory reset can help to clear all user defined settings, replacing them with the original default
values, including the DAB station list and preset stations. Press and hold the /MENU/INFO
button to enter menu selection, select the “ System ” option and press
the /SCAN/SELECT button to enter, select “ Factory reset ” then press the /TUN+ or
/TUN- button to choose YES or NO option, then press the /SCAN/SELECT button to
confirm.
SOFTWARE VERSION
This displays the current software version. Press and hold the /MENU/INFO button to enter
menu selection, select the “ System ” option and press the /SCAN/SELECT button to enter,
select “ SW version ” then press the /SCAN/SELECT button to view the current software
version.