18
DAB Operation
The first time you use DAB, make sure the aerial
is fully extended before selecting DAB mode,
because your radio will automatically scan
for DAB radio stations. If the aerial is not fully
extended your radio will not tune in properly.
During the scan, the display will show ”SCAN
##%” that indicates the stations that have been
found so far.
Once the scan has finished, the unit will show the
total number of the station, and then broadcast
the first alphanumerically found station.
The clock will be updated automatically if you can receive DAB/FM signal in your location. In order to
synchronize to the current local time, you must leave it on the DAB/FM station for a period of time.
DAB Full Scan
The FULL SCAN will search for the entire DAB Band III channels. After the scan has finished,
the first alphanumerically found station will be automatically selected.
1. Press /MENU button, and then press the
/
button to select FULL SCAN, and
then press the /PAIR button to confirm.
2. During the scan, the display will show SCAN ##%.
3. Once the scan has finished, the unit will show the total number of the station, and then
broadcast the first alphanumerically found station.
