JVC RC-E561B-DAB, Instruction Manual

Page: 8 / 100

EN
3. To remove stations that are listed but unavailable, press and hold the /MENU/INFO
button to enter menu selection, select the “ Prune ” option and press
the /SELECT/SCAN/PAIR button to enter, press the /TUN+ or /TUN- button to
choose YES or NO option, then press the /SELECT/SCAN/PAIR button to confirm. This
removes all invalid stations, indicated in the station list with a “ ? ” in front of the station
name.
PRESET STATIONS
To store a station in a preset memory, tune to the station that you want to save as a preset,
then press the PROG./M/P-MODE button on the unit until the display shows “ Preset Store” .
Use the /TUN+ or /TUN- button to choose a preset memory position
(for example, “ Preset 1 ”), then press the /SELECT/SCAN/PAIR button to confirm. Repeat
this operation to save up to 30 preset stations.
MANUAL TUNE
To do a manual tune, press and hold the /MENU/INFO button to enter menu selection,
select the “ Manual tune ” option and press the /SELECT/SCAN/PAIR button to confirm. Use
the /TUN+ or /TUN- button to tune to the desired stations.
NOW PLAYING INFORMATION
While a station is playing, the screen shows its name and DLS (Dynamic Label Segment) infor -
mation broadcast by the station such as program name, track title and contact details. To view
further information, press the /MENU/INFO button each time to show next set of information,
cycling through: DLS text, DL Plus information (this is only displayed if broadcast by the sta -
tion), signal strength, program type, ensemble name, channel number/frequency, signal error
rate and bit rate.
DYNAMIC RANGE COMPRESSION (DRC)
This function helps to reduce the difference between the loudest and quietest audio being
broadcast. Effectively, this makes quite sounds comparatively louder and loud sounds compara -
tively quieter. There are 2 options in this setting, the options available are: DRC/off . To change
the DRC setting, press and hold the /MENU/INFO button to enter menu selection, select the
“ DRC ” option then use the /SELECT/SCAN/PAIR button to choose a desired option.
CASSETTE OPERATION
UNDERSTANDING THE BUTTONS
PLAY - Press to play cassettes.
REW - From stop mode, press to rewind the tape toward the beginning.
F.FWD - From stop mode, press to advance the tape toward the end.
STOP/EJ. - Press to stop current tape activity or to open the cassette compartment door when
no buttons are active.
PAUSE - Press to interrupt tape play or record mode. Press the second time to resume tape
play or tape record mode.
PLAYING A CASSETTE TAPE
1. Press the /FUNC. button to Choose TAPE mode.
2. Press STOP/EJ. key to open the cassette compartment door.
3. Insert cassette tape into the compartment with the open edge facing up and the full reel on the right.
4. Close the door securely.
5. Press REW or F.FWD to move tape to the desired starting point.