AUX Operation
There is AUX IN socket located at the top of the unit. Analogue audio sound signals from
other sources can be connected to the unit through the socket.
1. Connect to another audio device using the AUX IN socket via a 3.5 mm stereo audio
cable.
2. While in the ON mode, press the SOURCE button repeatedly to select AUX mode.
3. Press /– button to adjust the volume to your desired level.
4. In AUX mode, operate your audio device directly for playback features.
Bluetooth® Operation
Pairing the unit with a Bluetooth® device to listen to music:
1. Press the SOURCE button repeatedly to select BT mode. “BT PAIRING” will show on
display.
2. The unit will enter pairing mode, and then “Pairing” will flashing on the display and
prompt a beep tone.
3. Activate your Bluetooth® device and select the search mode.
4. Select RC-D327B” and enter “0000” for the password if necessary. “Connected” will
show on display.
5. To disconnect the Bluetooth® function,
• Switch to another function on the unit or disable the function from your Bluetooth®
device. The unit will make a beep sound.
• Press and hold SCAN/
button.
If your Bluetooth® device supports A2DP, play music via your device.
• To pause/resume playback, press SCAN/ .
• To skip to a track, press
.
• Press /– button to increase or decrease the volume.
• The operational range between the unit and the device is approximately 8 metres.
• If the signal strength is weak, your Bluetooth® receiver may disconnect, but it will re-enter pairing
mode automatically.
• Compatibility with all Bluetooth® devices is not guaranteed.
• Make sure no cable is inserted in the AUX IN socket before or when using the BT mode.
• If a cable is inserted in the AUX IN socket, you cannot select BT mode.
• If a cable is inserted in the AUX IN socket while using the BT mode, the BT mode will be
disconnected and changed to AUX mode.
23
RC-D327B_IB_Final190408V4.indd 23
09/04/2019 12:24
