EN
ALARM OPERATION
NOTE: Before setting the alarm time, make sure the Clock has been set.
Setting Alarm 1 or Alarm 2
• In standby mode, press and hold
AL1
or
AL2
for 2 seconds. The hour and minute
digits will flash.
• Set the alarm time by repeatedly pressing
HR
and
MIN
respectively.
NOTE: Press and hold
HR
and
MIN
for fast forward.
• Press
AL1
or
AL2
again to select the alarm sound (OFF>BUZZER>RADIO in cycle).
Checking alarm time
Press and hold
AL1
or
AL2
for 2 seconds, the alarm time will flash on the display.
Turn off the alarm
Press
POWER
to turn off the alarm. The alarm will come on again at the set time on
the following days.
Snooze function
This function can be used to stop the alarm temporarily for about 9 minutes once the
alarm is activated. When the
SNOOZE
button is pressed, the buzzer or radio alarm
sounds will stop and sound again after about 9 minutes.
To cancel the alarm
Press repeatedly
AL1
or
AL2
until the alarm indicator light goes out on the display.
SLEEP TIMER OPERATION
The sleep function is designed to automatically turn off the Radio.
Setting sleep timer
• Press
SLEEP
, “90” will illuminate on the display.
• Press repeatedly
SLEEP
to select the desired sleep time from 90, 80, 70, 60, 50, 40,
30, 20 or 10 minutes.
• The radio will be turned off after the selected time has elapsed.
NOTE: To check remaining sleep time, press
SLEEP
. To cancel sleep timer, press
SLEEP
until
“OFF” is selected. To turn off the radio before the sleep time has elapsed, press
POWER
.
CARE AND MAINTENANCE
Wipe external surfaces with a soft cloth. If the cabinet is very dirty, unplug from the
mains supply and use a damp cloth soaked in a weak solution of washing up liquid and
water. Allow to dry thoroughly before reusing.
