JVC PD-Z50DX4 Instruction Manual Download

Page: 57 / 60

ENGLISH

PD-Z50DX4 / LCT1781-001A / English

Specifications

We may change the design and specifications without notice.

Pictures displayed on the screen using this TV’s ZOOM functions should not be shown for any

commercial or demonstration purpose in public places (cafes, hotels, etc.) without the consent of

the owners of copyright of the original picture sources, as this would be an infringement of

Model

PD-Z50DX4

Broadcasting systems

B, G, I, D, K, K1, M

Colour systems

PAL, SECAM, NTSC 3.58/4.43 MHz

Channels and frequencies

VHF low channel (VL) = 46.25 to 168.25 MHz

VHF high channel (VH) = 175.25 to 463.25 MHz

UHF channel (U) = 471.25 to 863.25 MHz

• Receives cable channels in mid band (X to Z+2, S1 to S10), super band (S11

to S20) and hyper band (S21 to S41).

Sound-multiplex systems

NICAM (B/G, I, D/K) system, A2 (B/G, D/K) system

Languages displayed by

teletext

Please see the table in the description “TELETEXT LANGUAGE” on page 44.

Teletext systems

FLOF (Fastext), TOP, WST (World Standard System)

Power requirements

110 - 240 V AC, 50/60 Hz

Power consumption

TV: 434 W (Standby: 3.3 W), Receiver: 21 W (Standby: 0.6 W)

Screen size

Viewable area 127 cm (measured diagonally)

Audio output

Rated Power output: 10 W + 10 W

Speakers

(9.5 cm

1 cm) DD speaker

VIDEO-1 terminal

(COMPONENT)

RCA connector

6, S-VIDEO connector

• Video input, S-VIDEO (Y/C) input, Componet video (Y, Cb/Pb, Cr/Pr) input and

Audio L/R inputs are available.

• 576p, 480p, 720p/60Hz and 1080i signals are available.

VIDEO-2 terminal

RCA connector

3, S-VIDEO connector

• Video input, S-VIDEO (Y/C) input and Audio L/R inputs are available.

VIDEO-3 terminal

(COMPONENT)

RCA connector

• Video input, Componet video (Y, Cb/Pb, Cr/Pr) input and Audio L/R inputs are

available.

• 576p, 480p, 720p/60Hz and 1080i signals are available.

VIDEO-4 terminal

RCA connectors

S-VIDEO connector

• Video input, S-VIDEO (Y/C) input and Audio L/R inputs are available.

VIDEO-5 (HDMI) terminal

HDMI connector

1, Digital video input and digital audio input available (Refer

to page 50 for details.).

OUT terminal

RCA connectors

• Video output and Audio L/R outputs are available.

AUDIO OUT terminal

RCA connectors

• Audio L/R outputs and SUBWOOFER output are available.

• Output level 0.5 Vrms.

DVI ANALOG AUDIO

INPUT terminal

RCA

• Audio L/R inputs are available.

CENTER CHANNEL INPUT

terminal

RCA connector

• CENTER CHANNEL input is available.

PC INPUT terminal

Analog RGB D-SUB (15 pin)

• PC signal is available. Refer to page 45 for details of the signals which can be

input.

Headphone jack

Stereo mini-jack (3.5 mm in diameter)

Dimensions (W

TV: 1350 mm

836 mm

110 mm (TV only)

Receiver: 435 mm

70 mm

313 mm

Weight

TV: 51.0 kg (TV only)
Receiver: 3.6 kg

Accessories

Refer to “Checking the contents of packages” on page 6.

PD-Z50DX4_Eng.book Page 55 Wednesday, October 27, 2004 10:43 AM

Summary of Contents for PD-Z50DX4





























































Search results

Summary of Contents for PD-Z50DX4

Reviews:

Related manuals for PD-Z50DX4

Brands by name

Popular brands

JVC PD-Z50DX4, Instruction Manual

Search results

Summary of Contents for PD-Z50DX4

Reviews:

Related manuals for PD-Z50DX4

Brands by name

Popular brands