1-16 (No.MB726<Rev.001>)
SECTION 4
ADJUSTMENT
4.1
ATTENTION IN SERVICE OF DVD SECTION
1. When pickup, Flash ROM, DVD module board was changed, initialize EEPROM by all means.
2. When full initialization was executed, execute learning with a DVD test disc by all means.
Test disc: VT-501, VT-502
Learning method: It is adjusted automatically by normal playback of a DVD disc.
4.2
GENERAL
*Note :
(1) Tray Lock while press and hold panel "STOP" key then press "EJECT"
(2) AM spacing (In power on AM source, panel keys)
4.3
SYSTEM MICOM TEST MODE
(1) In DVD/CD mode, press "SET" key + "10" key + "POWER" key repeatedly.
REMOTE KEY
Validation
INDICATION
FUNCTION
STOP + "0" + POWER Press during Standby
COLD
COLD START (Initialization of set)
STOP + "1" + POWER Press during Power On
(FL all light up)
After CLOCK SET, run 1 minutes as 1sec
STOP + "2" + POWER Press during DVD/CD or USB eg:
"A0D0S0T03BC"
DVD temperature feedback
STOP + "3" + POWER Press once anytime
eg:
"POWERKEY"
Power off/Safety trigger factor/cause
STOP + "4" + POWER Press during Power On
eg:
"FAN ON"
Fan on/off trigger
STOP + "5" + POWER Press during Power On
L0 C/SF/SH/SL/SE
Lev_Det Status (L0/1/2), Calorie C****, Karaoke Score
SH,SF,SE,SL.
STOP + "6" + POWER Press during Power On
VOLUME 15/MAX
Trigger vol 15 or max
SET + "10" + POWER Press during Power On
Refer SYSCON TEST Refer SYSCON TEST sheet
NX-D4
9K
I<< + KARAOKE SCORING
10K
>>I + KARAOKE SCORING
System micom version
NX-D4 :
"S D4 E 5600"
DVD/CD firmware version
"DVD 0317"
USB Telechip version
"USB 0000"
Touch Sensor
"TS 08"
