(No.MB394)1-7
3.1.5 Removing the CD changer unit
(See Fig.6 to 8)
• Prior to performing the following procedures, remove the top
cover.
Caution:
Although the CD mechanism unit can be removed without re-
moving the CD tray panel, it is still recommended to remove it
in order to prevent damage.
• From the front panel side of this set, push in the sections
marked with arrows and pull out the CD tray toward the front.
• Remove the CD tray panel by pushing both of its extremities
upward in the direction of the arrows.
• Push the CD tray deep into the set.
(1) Disconnect the cord wires from the CD board
CN703
and
CN203
.
(2) From the rear of the set, remove two screws
E
, and four
screws
G
on the front panel left and right side.
(3) Handle the CD changer unit rear, take out the unit.
Fig.6
Fig.7
Fig.8
UP
UP
CD tray panel
E
G
