JVC MX-GC5 Page 4 Service Manual Download

Page: 4 / 68

1. CLASS 1 LASER PRODUCT

2. DANGER :

Invisible laser radiation when open and inter

lock failed or defeated. Avoid direct exposure to beam.

3. CAUTION :

There are no serviceable parts inside the

Laser Unit. Do not disassemble the Laser Unit. Replace
the complete Laser Unit if it malfunctions.

4. CAUTION :

The compact disc player uses invisible

laser radiation and is equipped with safety switches
which prevent emission of radiation when the drawer is
open and the safety interlocks have failed or are
defeated. It is dangerous to defeat the safety switches.

Important for laser products

FUSE CAUTION

CAUTION:

REPLACE WITH SAME TYPE
AND RATING FUSE (S).

ATTENTION:

REMPLACER PAR UN(LES)
FUSIBLE(S) DE MEME TYPE
ET DE MEME VALEUR

5. CAUTION :

If safety switches malfunction, the laser is able

to function.

6. CAUTION :

Use of controls, adjustments or performance

of procedures other than those specified herein may
result in hazardous radiation exposure.

CAUTION

Please use enough caution not

to see the beam directly or touch

i t i n c a s e o f a n a d j u s t m e n t o r

operation check.

All manuals and user guides at all-guides.com

Summary of Contents for MX-GC5





































































Search results

Summary of Contents for MX-GC5

Reviews:

Related manuals for MX-GC5

Brands by name

Popular brands

JVC MX-GC5, Service Manual

Search results

Summary of Contents for MX-GC5

Reviews:

Related manuals for MX-GC5

Brands by name

Popular brands