1-12
MX-G950V/MX-G880V
MX-G850V/MX-G750V
Prior to performing the following procedure, remove
the metal cover, the CD changer mechanism
assembly and the rear panel.
Disconnect the wires from connector CN218 and
CN219 on the power board.
Disconnect the wire from connector CN204 on the
regulator board.
Disconnect the wire from connector CN220 on the
transformer board.
Remove a band on the voltage board.
Release the wire from the stopper on the regulator
board.
Remove the four screws
L
attaching the transformer
assembly.
1.
2.
3.
4.
5.
6.
Removing the power transformer
assembly (See Fig.24, 25)
Prior to performing the following procedure, remove
the metal cover, the CD changer mechanism
assembly, the rear panel, the antenna board, the
main board, the amplifier board, the voltage board,
the power board and the speaker board.
Disconnect the wire from connector CN204 on the
regulator board.
Release the wire from the stopper on the regulator
board.
Remove the two screws
M
attaching the reglator
board.
1.
2.
3.
Removing the regulator board
(See Fig.26)
Prior to performing the following procedure, remove
the metal cover, the CD changer mechanism
assembly and the rear panel.
Disconnect the wire from connector CN250 on the
power board.
Remove the band from the power board.
Move the power cord stopper upward and pull out it
from the base chassis.
1.
2.
3.
Removing the power cord (See Fig.27)
Fig.24
Fig.25
Fig.26
Fig.27
CN219
Regulator board
CN204
Transformer board
CN220
Power transformer assembly
Power transformer
assembly
Regulator board
CN204
L
L
M
M
Power transformer assembly
Power board
CN218
Stopper
Regulator board
CN204
Stopper
Power board
CN250
Power cord stopper
Band
Base chassis
Band