(No.XE007)1-3
SECTION 3
DISASSEMBLY
3.1
Disassembly procedure
3.1.1 Removing the internal battery
(See Figure 1)
Prior to performing the following procedure, remove the external
battery.
(1) Remove one screw
A
on the bottom of the main body.
Screw A : 13-MAKXC100W(M2 x 10L(K)W-NI)
(2) Pull out the internal battery in the rear direction.
Fig.1
3.1.2 Removing the keyboard assembly
(See Figure 2 to Figure 4)
(1) Push the three latches (
a
) in the upper part of the keyboard
with a single-slotted screwdriver or a flat screwdriver, and
lift the keyboard.
Fig.2
Fig.3
(2) Disconnect the wires from connectors
CON3
and
CON4
on
the main board respectively.
Fig.4
A
Internal battery
Latch a
Latch a
Latch a
Keyboard
In attaching
the keyboard
In removing
the keyboard
In removing
the keyboard
In attaching
the keyboard
2
2
1
1
2
2
1
1
CON3
CON4
Key board
Main board
Summary of Contents for MP-XP741DE
