background image

EN

 

41

Master Page: Right

GR-DVX709SH_37-79.fm

Page 41

WIPE/FADER

(

: Factory-preset)

Indicator

Parameter

Description

OFF

Disables effects.

FADER–WHITE

Fade in or out with a white screen.

FADER–BLACK

Fade in or out with a black screen.

FADER–B.W

Fade in to a colour screen from a black and white screen, or fade 
out from colour to black and white.

WIPE–CORNER

Wipe in on a black screen from the upper right to the lower left 
corner, or wipe out from lower left to upper right, leaving a black 
screen.

WIPE–WINDOW

The scene starts in the centre of a black screen and wipes in 
toward the corners, or comes in from the corners, gradually wiping 
out to the centre.

WIPE–SLIDE

Wipe in from right to left, or wipe out from left to right.

WIPE–DOOR

Wipe in as the two halves of a black screen open to the left and 
right, revealing the scene, or wipe out and the black screen 
reappears from left and right to cover the scene.

WIPE–SCROLL

The scene wipes in from the bottom to the top of a black screen, or 
wipes out from top to bottom, leaving a black screen.

WIPE–SHUTTER

Wipe in from the centre of a black screen toward the top and 
bottom, or wipe out from the top and bottom toward the centre 
leaving a black screen.

GR-DVX709SH_37-79.fm  Page 41  Saturday, February 23, 2002  6:06 PM

Summary of Contents for LYT0957-001A









































































































Reviews: