LX-P1010ZU/ZE
2.3. DISASSEBLY FLOWCHART OF
OPTICAL UNIT
This flowchart indicates the disassembly steps of the main parts
of Optical Unit. When reassembling, perform the step(s) in the
reverse order.
2.2.12. Removal of the Operation PWB
1. Remove 2 screws (J) as shown in Fig. 2-2-17.
2. releasing 2 tabs, remove the Eject Knob.
3. Remove the Remote Control Holder Unit.
4. Remove 4 screw (K) and the Support Plate as shown in Fig. 2-2-18.
5. Carefully pull out the Operation PWB
Assembly Note:
When installing the Eject Knob, be careful of the direction of
the insertion as shown in Fig. 2-2-19.
Fig. 2-2-17
Fig. 2-2-18
Fig. 2-2-19
Fig. 2-3-1
(PA014) 10
