24
Menu Functions
INSTALLATION
menu
e-shift
Switches the display resolution.
•
Off
: Switches to 2K resolution.
Picture Mode will automatically be set to fixed mode.
•
On
(recommended): Switches to 4K resolution.
Submenu
Functions and Descriptions
Projector Mode
See
"Choosing a location"
for details.
Test Pattern
Is used to adjust the image size and focus
and check that the projected image is free
from distortion. To close the test pattern,
go back to this menu and select
Off
.
Lamp Settings
•
Lamp Mode
Select the projector lamp power from the following modes.
•
Normal
: Provides full lamp brightness.
•
Eco
: Reduces system noise and lamp power consumption by 30%.
If the
Eco
mode is selected, the light output will be reduced and result in darker
projected pictures. See
"Setting Lamp Mode"
for details.
• Reset
Lamp
Timer
Activate this function only after a new lamp is installed. When you select
Reset
,
a "
Reset Successfully
" message displays to notify that the lamp time has
been reset to "0".
•
Lamp Information
Select to learn the duration (in hours) of lamp usage which is automatically
calculated by the built-in timer.
12V Trigger
There is one 12V trigger that works according to your needs for installation
scenarios. Two selections are available:
•
Off
: If this is selected, the projector will not send electronic signal out
when it is turned on.
•
On
: The projector will send a low to high electronic signal out when it is
turned on, a high to low signal out when it is turned off.
Submenu
Functions and Descriptions
