JVC LVT1364-006B Instructions Manual Download Page 88

Page: 88 / 114

G-1

Warnings, Cautions and Others

CAUTION—

(STANDBY/ON) button!

Disconnect the mains plug to shut the power off completely (all
lamps and indications go off). The

(STANDBY/ON) button in

any position does not disconnect the mains line.
• When the unit is on standby, the STANDBY lamp lights red.
• When the unit is turned on, the STANDBY lamp goes off.

The power can be remote controlled.

CAUTION

To reduce the risk of electrical shocks, fire, etc.:
1.

Do not remove screws, covers or cabinet.

Do not expose this appliance to rain or moisture.

CAUTION

• Do not block the ventilation openings or holes.

(If the ventilation openings or holes are blocked by a
newspaper or cloth, etc., the heat may not be able to
get out.)

• Do not place any naked flame sources, such as

lighted candles, on the apparatus.

• When discarding batteries, environmental problems

must be considered and local rules or laws governing
the disposal of these batteries must be followed
strictly.

• Do not expose this apparatus to rain, moisture,

dripping or splashing and that no objects filled with
liquids, such as vases, shall be placed on the
apparatus.

Safety_UXG4[A]

05.3.22, 11:58 AM

Summary of Contents for LVT1364-006B



















































































































Search results

Summary of Contents for LVT1364-006B

Reviews:

Related manuals for LVT1364-006B

Brands by name

Popular brands

JVC LVT1364-006B, Instructions Manual

Search results

Summary of Contents for LVT1364-006B

Reviews:

Related manuals for LVT1364-006B

Brands by name

Popular brands