6
Set up and connections
TV/VIDEO
MENU/OK
CHANNEL
VOLUME
150 mm 50 mm
150 mm
200 mm
50 mm
Care when setting
Hole for belt
Belt
(not provided)
Screw (not provided)
1
2
Power lamp
Remote control sensor
ON :
Lit
(Blue)
OFF
:
Unlit
Power lamp lights
while the TV is on.
• “Power Lamp” (P. 16)
Switch between
TV / VIDEO devices
Display on-screen menu / set
Change channel / Page /
Hyper Scan Function
Volume / Adjust
Power On / Off
To Headphone (P. 8)
■
Power requirements
•
Connect the power cord only to a 110-240V, 50/60Hz AC outlet.
■
When attaching the TV to the wall, use the optional JVC wall
mounting
unit
•
Consult a quali
fi
ed technician.
•
JVC assumes no responsibility for damage due to improper mounting.
•
200 mm x 200 mm mount which conforms to VESA standards.
■
Installation requirements
•
To avoid overheating, ensure the unit has ample room.
- If you have any problem with assembly, please contact a retailer or a
dealership.
Note: 4 screws included.
Stand Assembly
- Insert the stand into the panel at the position where the screw holes
are, and fasten the screws.
•
To prevent the TV from falling thread the belt through the hole on the
back of the stand and secure it to the TV rack.
