JVC LT-26R70BU, Instructions Manual

Page: 20 / 21

33
ENGLISH
34
IMPORT
ANT!
PREP
ARE
USE
SETTINGS
TROUBLE?
“T-V LINK” allows the TV to share information easily with a connected “T-V LINK” compatible device.
By using T-V LINK :

You can send the channel information programmed on the TV to the “T-V LINK” compatible device, so that
both the TV and the external device have the same channel settings. When connecting a new external device,
channel information is loaded into it, allowing channel setup to be completed very quickly. For more details, refer
to the external device’s manual.

You can easily record the TV programme you are viewing on a “T-V LINK” compatible device by using the
“DIRECT REC” feature. For more details, refer to the external device’s manual.
*Macintosh* computers are not supported.
(Macintosh is a registered trademark of
Apple Computer, Inc.)

If the signal doesn’t appear, check that the vertical
frequency on the PC is set to “60Hz”.
Technical information
Some cable companies transmit a signal called “ACI” which contains information that allows TV channels to be
registered automatically on your TV.
When an ACI signal is received, “ACI Start / ACI Skip” appears in the “Auto Program” screen.
Depending on the country selected during “Auto Program”, the receivable broadcast system differs.

UNITED KINGDOM: Receive only PAL-I.

FRANCE: Can receive SECAM-L.
To receive SECAM-L in countries other than France:
1) Change the “Country” to “France” in “Auto Program”.
2) Press the “BACK” button to return to the menu and enter the channel using “Insert” or “Manual”.
Connect a “DVI“ device to “EXT-5 (HDMI)” using “DVI-HDMI” conversion cable. Connect analogue sound output of
the DVI device to L and R terminals in EXT-4.

Set “Audio” in “HDMI Setting” to “Analogue” or “Auto”  (P. 28)
Troubleshooting
(continued)
Resolution 640 x 480 (VGA) 1024 x 768 (XGA)
Vertical frequency (Hz) 60.0 60.0
What is “T-V LINK”?
What is “ACI” (Automatic Channel Installation)?
Receivable broadcast systems
PC Signals that can be displayed
Connect “DVI” devices
Problem Actions page
Display
Screen
Functions
HDMI

Switch “Size” in “HDMI Setting” to “1” or “2”.
Wrong screen size 28

Use the cable marked with HDMI logo.
No picture, no sound –

Check if the device is compliant with HDMI.

Switch “Audio” in “HDMI Setting” to “Digital” or “Auto” for
HDMI devices, or “Analogue” or “Auto” for DVI devices.
No sound
–
28

Wait a little for the signal to stabilize when switching the
signal format for an “HDMI” device.
Green and distorted
screen
–

It is not a malfunction. Some functions (dark background) in
the menu do not work depending on the situation.
Some functions do not
work
–

“EXT-4”, “EXT-5” inputs and PC mode cannot be selected in
the sub-picture.

RGB input signal of “EXT-1” and “EXT-2” are not available in
dual-picture mode.
Some inputs cannot
be selected in the
sub-picture
–

Is the “T-V LINK” compatible device connected to “EXT-2”?

Is the SCART CABLE “Fully Wired”?

Is the “T-V LINK” compatible device turned on?
After confirming all the conditions above, press “OK” button
again.
“Feature Not Available”
appears
34
34
–

Press
2
to start “ACI” again.
If you still receive the “ACI Error” after numerous tries, press
3
to cancel “ACI”.
“ACI Error” appears –

LCD panels use fine dots (“pixels”) to display images.
While more than 99.99% of these pixels function properly,
a very small number of pixels may not light, or may light all
the time.
Please understand that this is not a malfunction.
Black or white dots
appear on the screen
–