(No.YA695<Rev.001>)
VSE
Printed in Japan
4.5.3 CHANGE AND MEMORY OF SETTING VALUE
SELECTION OF SETTING ITEM
•
[FUNCTION
/
]
key.
For scrolling up / down the setting items.
•
[FUNCTION
/
]
key.
For select the setting items.
CHANGE OF SETTING VALUE (DATA)
•
[FUNCTION
/
]
key.
For scrolling up / down the setting values.
MEMORY OF SETTING VALUE (DATA)
The setting value will be stored automatically when release the
REMOTE CONTROL UNIT keys.
4.5.4 FACTORY MODE SELECT KEY LOCATION
4.6
ADJUSTMENT PROCEDURE
4.6.1 VIDEO CIRCUIT
SECTION 5
TROUBLESHOOTING
This service manual does not describe TROUBLESHOOTING.
[FUNCTION
/
] key
[Function
/
] key
[MUTING] key +
[INFORMATION] key
Enter The Factry Mode.
Scrolling up / down the
setting value.
Select the setting item.
Item
Measuring
instrument
Test point
Adjustment part
Description
WHITE
BALANCE
Remote
control unit
Signal
generator
[White Balance]
Normal R
Normal G
Normal B
(1) Set COLOUR TEMP. to "
Normal
".
(2) Select "
White Balance
" from the FACTORY
MODE.
(3) Receive a PAL 75% all white signal.
(4) Adjust the setting values of
<Normal R>
,
<Normal G>
and
<Normal B>
so that the
screen becomes maximum white.
NOTE:
When the normal mode is adjusted, other modes
(cool/ warm) are automatically adjusted.
Victor Company of Japan, Limited
Display Division 12, 3-chome, Moriya-cho, Kanagawa-ku, Yokohama-city, Kanagawa-prefecture, 221-8528, Japan
