(No.YA606<Rev.002>)1-9
2.4
TECHNICAL INFORMATION
2.4.1 LCD PANEL
This unit uses the flat type LCD (Liquid Crystal Display) panel that occupies little space, instead of using the conventional
CRT(Cathode Ray Tube). This panel adopts "normally white" mode where the transmittance or reflective rate is maximum, and the
screen is white when no voltage is applied.
2.4.1.1
SPECIFICATIONS
The following table shows the specifications of this unit.
2.4.1.2
PIXEL FAULT
There are three pixel faults - bright fault , dark fault and flicker fault - that are respectively defined as follows.
BRIGHT FAULT
In this pixel fault, a cell that should not light originally is lighting on and off.
For checking this pixel fault, input ALL BLACK SCREEN and find out the cell that is lighting on and off.
DARK FAULT
In this pixel fault, a cell that should light originally is not lighting or lighting with the brightness twice as brighter as originally lighting.
For checking this pixel fault, input 100% of each R/G/B colour and find out the cell that is not lighting.
FLICKER FAULT
In the pixel fault, a cell that should light originally or not light originally is flashing on and off.
For checking this pixel fault, input ALL BLACK SCREEN signal or 100% of each RGB colour and find out the cell that is flashing on
and off.
Item
Specifications
Maximum dimensions ( W
×
H
×
D )
626.0 mm
×
373.0mm
×
42.0 mm
Weight
4.5 kg
Effective screen size
Diagonal : 66.0 cm (H: 57.6 cm
×
V: 32.3 cm)
Aspect ratio
16 : 9
Drive device / system
a-Si-TFT active matrix system
Resolution
Horizontally 1366
×
Vertically 768
×
RGB < W-XGA > 3147264 dots in total
Pixel pitch (pixel size)
Horizontally: 0.1405 mm, Vertically: 0.4215 mm
Displayed color
16777216 colors 256 colors for R G and B
Brightness
500cd/m2
Contrast ratio
800 : 1
Response time ( Tr + Tf )
less than 8 ms
View angle (Horizontally)
160
°
View angle (Vertically)
160
°
Surface polarizer
Anti-Glare type Low reflective coat
Color filter
Vertical stripe
Backlight
Cold cathode fluorescent lamp
×
12
Power supply voltage in LCD
5 V
Power supply voltage in inverter
24 V
Panel interface system
LVDS (Low Voltage Differential Signaling)
Summary of Contents for LT-26DC9BH
Page 90: ...2 92 No YA606 Rev 001 No YA606 Rev 001 2 91 PATTERN DIAGRAMS MAIN PWB PATTERN SOLDER SIDE ...
Page 91: ... No YA606 Rev 001 2 93 2 94 No YA606 Rev 001 MAIN PWB PATTERN PARTS SIDE ...
Page 92: ...2 96 No YA606 Rev 001 No YA606 Rev 001 2 95 MPEG PWB PATTERN SOLDER SIDE ...
Page 93: ... No YA606 Rev 001 2 97 2 98 No YA606 Rev 001 MPEG PWB PATTERN PARTS SIDE ...