JVC LT-26A80SU, Instructions Manual

Page: 31 / 85

13 14
ENGLISH
02
AUTO PROGRAM
0%
CH
EDIT
01
AV
PR
02
03
04
05
06
07
08
09
ID CH/CC
YLE1
_ _ _ _ _
CH 02
CH 03
CH 04
CH 05
CH 06
CC 01
CC 02
CC 03
CC
04
DOWNLOAD TV RECORDING DEVICE
T-V LINK
LANGUAGE
COUNTRY
IMPORT
ANT!
PREP
ARE
USE
SETTINGS
TROUBLE?
Initial settings
(continued)
4
Set analogue channels
Initial setting is complete

Edit digital channels

Editing digital channels (P. 45)

If digital channel reception is poor

When the digital channel reception is poor (P. 14)

If analogue channel reception is poor

Troubleshooting (P. 49)

Some digital channels cannot be watched on this TV.

(P.55)
5
Register analogue channels
Check what was registered

Edit analogue channels
 @ in “Editing analogue
channels” (P. 47)

When not using
“T-V LINK”

When using “T-V LINK”

If “FEATURE NOT
AVAILABLE” appears :
 Is a “T-V LINK” compatible
device connected to “EXT-2”?

Is the device turned on?
Set T-V LINK

Confirm
Confirm the language
select
3

When not using analogue channels
 

When using analogue channels (or cable TV)


When change a language

1
2
3
select

When change a country
When the TV cannot find the digital channels

Is the TV connected correctly to the aerial?

Change the direction of the indoor aerial.

Is there a digital channels transmission tower nearby?

Turn “ATTENUATOR” to “ON” (P. 34), since the radio waves are too strong.
Check the following points
 Register digital channels again  “Service Scan” (P. 43)

If you still cannot watch digital channels after following the steps above, there may be a problem
with your aerial or its cable. Or, the signal may be too weak.

Consult your retailer
When the digital channel reception is poor
The “Missing or weak signal” message appears.

Check digital channels signal

Signal Check (P. 43)

If you still cannot watch digital channels after following the steps above, there may be a problem
with your aerial or its cable. Or, the signal may be too weak.

Consult your retailer
 Is the TV connected correctly to the aerial?

Change the direction of the indoor aerial.

Is there a digital channels transmission tower nearby?
 Turn “ATTENUATOR” to “ON” (P. 34), since the radio waves are too strong.
Check the following points

Language for
on-screen analogue
channel displays and
menus (excluding the
DTV menu)
@
⁄
(blue)
When “RF Attenuator” setting screen is displayed

Set “ATTENUATOR” (P. 34) from this setting screen.
To set the “ATTENUATOR” on select “On”, to set it off select “Off”

This setting screen will appear during the “Factory Settings” (P. 43) with “ATTENUATOR” set to “ON”.
13-14 2/9/2007 11:12:27 AM