(No.YA492)1-13
3.2
MEMORY IC REPLACEMENT
• This model uses the memory IC.
• This memory IC stores data for proper operation of the video and drive circuits.
• When replacing, be sure to use an IC containing this (initial value) data.
3.2.1 MEMORY IC REPLACEMENT PROCEDURE
1. Power off
Switch off the power and disconnect the power plug from the AC outlet.
2. Replace the memory IC
Be sure to use the memory IC written with the initial setting values.
3. Power on
Connect the power plug to the AC outlet and switch on the power.
4. Receiving channel setting
Refer to the OPERATING INSTRUCTIONS and set the receive channels (Channels Preset) as described.
5. User setting
Check the user setting items according to the given in page later. Where these do not agree, refer to the OPERATING
INSTRUCTIONS and set the items as described.
6. SERVICE MODE setting
Verify what to set in the SERVICE MODE, and set whatever is necessary (Fig.1). Refer to the SERVICE ADJUSTMENT for setting.
3.2.2 SERVICE MODE SETTING
SERVICE MODE SCREEN
NOTE:
As self check feature is not used in this TV,
"2.SELF_CHECK"
and
"4.OPTION"
cannot be selected
(screen display only).
Fig.1
SETTING ITEM
SERVICE MODE SCREEN
1. ADJUST
S001 5I R OF 126
S001 5I R OF 126
PAL50 FULL STD H
PAL50 FULL STD H
Not used
(Display only)
SERVICE MENU
SERVICE MENU
1.ADJUST
1.ADJUST
2.SELF_CHECK
2.SELF_CHECK
3.I2C STOP
3.I2C STOP
4.OPTION
4.OPTION
Setting
items
Setting items
Settings
Item No.
1.ADJUST
Video system setting -1
Adjust
S001 - S096
Video system setting -2
Fixed
D001 - D020
D031 - D099
Audio System Setting -1
Fixed
A001 - A003
Audio system setting -2
Fixed
SD10 - SD15
Option Setting
Fixed
O001 - O004
